Видео

@ihsanbacha1437 it's their 6kw output version. The MIN 6000TL-X

I don't have a follow up video yet. But have since upgraded the miners to a single s19. As far as usd costs, I paid off the hardware about a year ago. However, when doing the btc math I still have 2/3 years before it is more profitable to have built and run the Mine vs simply buying btc back then.

Yes, but modern asic require communication from their factory 240v powers supply units. This way also allows me to offset other demanding electric activities like running my welder.

With the stock ecu, which is unlocked using hptuners cable & software

I don’t have that specifically, sorry. I installed the engine/trans in the car. Had a friend hold the shifter straight, while I cut the linkage shorter/in half and welded the pieces back together in the new position.

Thank you

Thank you for the kind words :). I always planned on making videos again.. just haven’t had the motivation to do the cool stuff lately. But it’s coming back with warm weather, friends motivating me and a little more budget.

He did use the glow plugs? He manual fired them from under the hood for several seconds

🤔 I figured there would be some type of catch but corrosion in the fuel system 😮

@@ThomasMiata All the major oil companies spend millions on their laboratories run by top chemical engineers in an attempt to make a better product than their competition. If an additive would improve their products, it would be in them. A bottle of oil is a balanced formulae of chemicals that interreact with each other. Dump some additive in it and you've changed the chemical balance of the oil for the worse. Like I said, these snake oil additives started appearing off and on in the 1960's. Even car manufacturers warn you against putting them in your engine.

@@arthurxxxxxxx6664 I used to put used engine oil in this truck because it burned so much from the sump. It was dirty inside and out of the engine. Would run it as fuel hardly cut with gasoline too.

😂 a corvette is just a big Miata with the correct engine

Break even in usd on equipment cost was hit recently, but still have 0.3 btc to go before it pays off for real. Should be another year.

For anyone that might read this, I tried it and it didn't help. VATS is your enemy! Lol. Just spend the money and get it flashed out. The Pink wires.... Idk seems unnecessary

@@away2619 in the video I mention that I am using a Vats disabled ecu. The pinks all together are for receiving 12+ to the individual components running the engine. HPTuners cable was used for removing vats.

This engine ran fantastic after being tuned but somehow ate the head from a screwdriver (possible previous owner sabotage of intake manifold). It was also a locked up 5.3 that I got free with atf.. so why care 🤷‍♂️

And the most important thing, removing the security VATS from the ecu.

More would be better, but it’s not a need. Timers currently turn the system on/off according to the sunrise/sunset.

Absolutely. This setup was put in a car and ran with 8psi of boost for a dyno run and 2 drift days. Somehow it got a screwdriver head inside the intake (previous owner maybe didn’t like my lowball price and glued metal inside the intake I used) and ate a piston. Currently have the same harness powering a 6.0 lq9 with 8psi on the car.

This was the stock radiator, which I think has an expansion tank built in. Currently this car is down because the engine threw a rod.

If it will be running for less than a minute or 2 and it was entirely cold before starting, it will be fine for testing.

I think it will bolt up, but don’t expect it to last too long. You will also break driveshafts, so better to get the zf before the custom driveshaft. I highly recommend sourcing a stronger trans and not wasting any energy building it so weak.

It was a walbro 250 I think, but any gas pump would work with that intake manifold. The fuel rail has the pressure regulator built in.

Antminer s9

When the sun is 100% I get about 5000watts. The miners consume about 3500 of that and the house used the rest. At night, I turn off the miners.

@@ThomasMiata Thanks for answer, do you have battery system? I sry for question, but iam not good in english, so you maybe say it in video, but i dont heart that. Thanks.

@@cafrmen no battery. The asic miners are turned on and off using timers. With the amount of power the miners consume, leaving them on all day, and collecting all the power from solar would require 4x as many panels and a very expensive battery bank. I built a solar array that used very inexpensive parts, but that means I can only run the miners for 4-8 hours per day. My solar array cost was $2000 usd and my miners cost $1000 (miners are much cheaper now) System cost to build and power for 2-3 years is about 0.12 bitcoin. It’s been 19 months, and my total mined is 0.062.

@@ThomasMiata Thanks for yours reply, now i get it. I wish you happy mining and more BTC.

The trick mainly is to remove the vats programming from the ecu using tuning software like hptuners